Perform Wireless Lan Setup Again Cannon

Solution

Before connecting the machine to the network, brand certain that configuration of the computer and admission point or router is complete, and that the computer is connected to the network.

Notes on Wireless Connexion

• The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environs. For details, refer to your device's instruction manual or contact its manufacturer.
• In an role setup, consult your network administrator.
• If you connect to a network that is not protected with security measures, at that place is a adventure of disclosing data such as your personal information to a third party.
• If an mistake message appears or if you have problem with the network connection, refer to the printed manual: Network Setup Troubleshooting.

IMPORTANT

An "Advert-hoc connection," which establishes a direct connection to the computer over wireless connection without using an access point, is not supported.

Be sure to prepare an access point.

Annotation

Wireless Setup Using WPS (Wi-Fi Protected Setup)

1. Use the Like shooting fish in a barrel-Scroll Bike (A) to select　Settings, then press the OK button.

two. Select Wireless LAN setup, then printing the OK button.

3. Select Yes, then press the OK push button.

When wireless connection is enabled, the Wi-Fi lamp (B) lights bluish.

4. Select WPS settings, then printing the OK push.

v. Select Push push button method, and so press the OK button.

6. Press the OK push button.

NOTE

To use the Pin code method for setup, select Pin method in footstep 5, and so press the OK button. Follow the on-screen instructions to operate the machine and access indicate. When the setup is complete, the completion screen appears. Press the OK button to render to the Settings screen.

A timeout mistake occurs if setup is not completed within x minutes. If the timeout error screen appears, press the OK button, then perform the setup again and gear up the new PIN code displayed on the screen to the access signal. If another mistake appears, refer to the printed manual: Network Setup Troubleshooting.

7. When the access point is ready, press the OK push button on the machine, then press the WPS button on the access indicate inside 2 minutes.

The Wi-Fi lamp (blue) flashes while searching for an access point.

eight. When the completion screen appears, printing the OK button, then press the Domicile push (C).

The standby screen returns.

IMPORTANT

If the timeout fault screen appeared repeatedly, or if another error appeared, refer to the printed transmission: Network Setup Troubleshooting.

NOTE

For details on WPS, refer to the manual of your access point.

Confirm Connection Condition

1. Press the HOME button (A), select Settings using the Easy-Curlicue Wheel (B), then press the OK push button.

IMPORTANT

Confirm connectedness status afterwards installing the machine in the target location.

2. Select Device settings, then press the OK button.

iii. Select LAN settings, and then press the OK button.

4. Select Confirm LAN settings, then press the OK button.

5. Select Wireless LAN setting list, then press the OK button.

Make certain that Connection is set to Active, then press the HOME push.

It may take a while before the connexion is complete. In this case, press the Back button (C) and expect for virtually a infinitesimal, and then display the Wireless LAN setting list screen over again.

NOTE

If the advice status does not better, make sure of the following.

• The machine and access point are turned on.
• There is no obstacle betwixt the machine and admission signal, and wireless communication is possible.
• There is no microwave, refrigerator or any other object that may cause radio interference nearby.

Install the Software

To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The installation process takes virtually 20 minutes. (The installation time varies depending on the computer environment or the number of applications to be installed.)

The screens below are based on Windows Vista operating system Ultimate Edition (futurity referred to as "Windows Vista") .

Important

• Quit all running applications before installation.
• Log on as the administrator (or a member of the Administrators group).
• Do not switch users during the installation procedure.
• Cyberspace connection may exist required during the installation. Connexion fees apply.
• It may be necessary to restart your computer during the installation procedure. Follow the on-screen instructions and practise not remove the Setup CD-ROM during restarting. The installation resumes once your computer has restarted.
• If the firewall part of your security software is turned on, a alarm message may appear that Catechism software is attempting to access the network.

If such a warning bulletin appears, ready the security software to always let access.

Important

If y'all are using Cyberspace Explorer 7 or subsequently, you can employ the Web impress software Easy-WebPrint EX. An internet connection is required for installation. (It is besides possible to install this software later.)

1. Turn on the computer, then insert the Setup CD-ROM into the CD-ROM drive.

The setup program volition start automatically.

Note

If the program does not start automatically, double-click the CDROM icon in Reckoner or My Figurer.

When the CD-ROM contents announced, double-click MSETUP4.EXE.

Windows Vista -> ii

Windows XP/2000　-> 3

2. Click Run Msetup4.exe on the AutoPlay screen, then click Go along on the User Business relationship Control dialog box.

If the User Business relationship Control dialog box reappears in following steps, click Continue.

3. Select your place of residence, then click Next.

NOTE

If the Select Language screen appears, select a language, and so click Next.

4. Select a country or region, so click Next.

Note

Displayed only when Europe, Centre Due east, Africa or Asia is selected on the screen in stride iii.

5. Click Easy Install.

The drivers, application software, and on-screen manuals are installed all together.

Annotation

If you want to select item items to install, click Custom Install.

half-dozen. Click Install.

Of import

If you are using Internet Explorer seven or afterward, you can utilize the Web print software Easy-WebPrint EX. An cyberspace connectedness is required for installation. (It is also possible to install this software later.)

7. Select Use the printer on network, and so click Next.

viii. Read the License Understanding screen advisedly and click Aye.

Important

Follow any on-screen instructions to proceed with the software installation.

ix. When the Please Allow All Install Magician Processes screen appears, click Next.

10. When the Printer Detection screen appears, click Next.

Of import

If the Printer Detection screen is not displayed, the connection method is non correctly selected in step 7. Click Cancel and beginning again from pace 6, then be sure to select Use the printer on network in step seven.

eleven. When the Detected Printers Listing dialog box appears, select the machine, then click Next .

When the Setup Completion dialog box appears, click Adjacent .

Annotation

If the car is not detected, Check Printer Settings dialog box is displayed. Refer to the printed transmission: Network Setup Troubleshooting . Make certain there is no trouble, then click Next.

12. When the Connexion Performance Measurement dialog box appears, click Next.

Confirm the measurement results, then click Finish.

Ensure that is displayed in Connectedness Performance between the Printer and the Admission Point.

NOTE

• You can cancel measuring by clicking Cancel. You lot also examine the detailed status of the communication link afterward setup. For details, refer to the on-screen manual: Advanced Guide.
• If an icon other than appears, improve the communication status by referring to the displayed message or the help file, then click Remeasurement.

Install the Software (Information)

ane. When the Load plain newspaper into the cassette screen appears, follow the onscreen

instructions to go along with the software installation.

Notation

Important Information for the Installation

• Necessary Data for the User Registration

The production serial number is required when registering the product. The serial number is located inside the machine (as shown in the illustration).

IMPORTANT

When opening the Scanning Unit (Embrace) (A), the Impress Caput Holder moves automatically if the unit of measurement is powered on.

Notation

The User Registration screen will only exist displayed when Europe, Middle Eastward, Africa is selected on the Select Your Place of Residence screen.

• About Extended Survey Program

If you can hold to Extended Survey Program, click Concord.

If you click Do not agree, the Extended Survey Plan will not be installed.

(This has no result on the machine'due south functionality.)

ii. Click Exit to complete the installation.

If Restart is displayed, follow the education to restart the computer.

After restarting the computer, remove the Setup CD-ROM and keep information technology in a rubber place.

brennansullumeent.blogspot.com

Source: https://hk.canon/en/support/8200574300

Share this post